Blog

Was ist die Laserschneider für Metallrohre?

Laserschneider für Metallrohre, specially designed for metal tube/pipe laser cutting. The double chuck structure can cut metal pipes with a diameter between 20-220mm. Equipped with 1000w-6000w fiber laser, the tube length can be 3m, 6m, 9m, 2000w and above power is equipped with an independent cabinet with built-in air-conditioning, and an automatic loading and unloading device can be installed to realize automatic processing.

Was ist die Laser-Rohrschneidemaschine?

Rohre und Profile werden überall eingesetzt - vom Maschinen- und Anlagenbau bis hin zur Möbelindustrie. Der Laser hat neue Gestaltungsmöglichkeiten eröffnet, so dass immer mehr Konstrukteure die Vorteile von lasergeschnittenen Rohren und Profilen nutzen und damit die Nachfrage erheblich steigern. Entdecken Sie Komplettlösungen für die Welt des Laserrohrschneidens und erfahren Sie mehr über die TruLaser Tube Maschinen.

Beschreibung

Most metal fabricators have a strong understanding of what fiber laser cutting technology has done for flat sheet processing, but just what has the fiber laser done for tube cutting? Quite a bit, actually.

Some things are quite noticeable. The laser “generator” on a fiber laser is much smaller when compared to a traditional CO2 resonator. In fact, the fiber laser is created by banks of diodes that are put together in a briefcase-size module that can range in power from 600 to 1,500 watts. Multiple modules are spliced together to create the final powered resonator, which is typically the size of a small filing cabinet. The light generated is channeled and amplified through fiber-optic cable. When the light exits the fiber-optic cable, it is the same that is was upon being generated with no loss of power or quality.It is then adjusted and focused for the type of material to be cut.

Anwendungen

Die tube laser cutter is designed for laser cutting processing for metal tube and pipe, the welding body offers the robust construction that iGOLDENCNC products are known for, combined with a competitive set of configurations.

Heiße Anwendungen sind das Schneiden von rostfreiem Stahl, Kohlenstoffstahl, Aluminium, Kupfer, verzinktem Blech und anderen Metallrohren.