Großformatige Gantry-Plasmaschneidmaschine für Metallstahl
Item No.: iGP-G
Gantry plasma cutting machine is a high-efficiency, high-precision, and high-reliability multifunctional thermal cutting automation equipment that combines computer control, tight mechanical transmission, oxygen gas cutting or plasma cutting technology. This model is small in size, light in weight and easy to operate. Has a very high-cost performance.
Category: CNC Plasma Cutter >> Gantry Plasma Cutting Machine
Reaktionszeit: Innerhalb von 1 Stunde
Lieferfähigkeit: 300 Sets/Monat
Price Range: $1100-$1400
Beschreibung
Für wen ist es gedacht?
The gantry plasma cutting machine adopts a gantry structure and is equipped with flame cutting and plasma cutting. It has the well-known sturdy structure of iGOLDENCNC products and has a set of competitive configurations.
Widely used in metal (carbon steel, stainless steel and other non-ferrous metals) processing, suitable for high-precision steel processing industries, environmental protection equipment, mechanical processing, bridge construction, boilers, shipyards, steel processing and other industries.
Was macht sie einzigartig?
The iGP-G series gantry plasma cutting machine, which is popular among professional users, is suitable for large-volume sheet metal processors.
>Gantry structure, bilateral drive, large cutting area;
>The beam has good rigidity and high cutting precision;
>Thickened and widened guide rail, wear-resistant without deformation;
>Einfache Bedienung, schnelle Beseitigung von Hindernissen, was dem Lernen förderlich ist;
>Unterstützt vom Branchenführer iGOLDENCNC.
Applications of Gantry Plasma Cutting Machine
Cutting for Stainless Steel
Cutting for Carbon Steel
Cutting for Copper
Cutting for Aluminum
Cutting for Metal Screen
Cutting for Metal Shelf
Cutting for Outdoor Desk
Cutting for Metal Wall
| Horizontal Cutting Range | 2300mm |
| Longitudinal Cutting Length | 6000mm |
| Driving Method | Double Driving |
| Torch Lifting Stroke | ≤200mm |
| Straightness of Main Rail | ≤±0.2 mm/5m |
| Longitudinal Level of Main Rail | ≤±0.2mm/5m |
| Level between Two Rails | ≤±0.5 mm/5m |
| Parallelism between Two Rails | ≤±2 mm/guage |
| Max. Laufgeschwindigkeit | 10000mm/min |
| Side Length Error (four sides) | ≤0,5mm |
| Diagonal Error | ≤0,5mm |
| Back to Origin Deviation | ≤0.2mm |
| Diagonal Straightness | ≤0.3mm |
| Intersection Deviation | ≤0,5mm |
| Forward and Reverse Straight Line Deviation | ≤0.2mm |
| Flame Cutting Thickness | Perforate: 5-60mm; Edge Cutting: 5-120mm |
| Cutting Speed | 10-3500mm/min |
Features of Gantry Plasma Cutting Machine
Heavy-duty Beam
The beam is welded with 8mm thick Q235 formed steel plate. The upper and back of the beam are bent by steel plate to a 90-degree arc. The front of the beam is welded with 18mm thick steel plate. The whole surface is processed by a planer to reduce the deformation of the whole structure and increase the rigidity.
After the whole machine is welded, it is subjected to aging stress relief treatment, surface derusting treatment and surface painting treatment.
The structure and rigidity of the whole machine ensure the smooth operation of the CNC cutting machine and extend the service life of the machine.
Longitudinal Structure
Dual motors and dual drives, each of the left and right frames is equipped with a set of longitudinal drive servo components, and a guide rail scraping device is installed on the ends of the left and right frames. In addition to ensuring the cleanness of the longitudinal guide rail surface, it can also prevent steel slag from entering the frame and damaging the machine Moving parts.
Inside the mainframe of the machine, there is a longitudinal guiding system of the machine to ensure the straightness of the longitudinal running, realize the clamping movement without gap, and ensure the straightness of the longitudinal movement of the whole machine.
Central Gas Distribution System
The air circuit adopts Taiwan Airtac solenoid valve to ensure safe use and service life.
High-temperature resistant hoses are used in the control part of the line to ensure line safety.
The special flame insulation board protects the gas path.
Japan YASKAWA Servo Motor
Taiwan HIWIN Rail Racks
Japan SHIMPO Reduzierstück
Automatic Arc Voltage Height Regulator
The automatic height adjustment system of the torch controlled by closed-loop PWM is used to keep the height of the torch to the steel plate constant during the plasma cutting process.
Steuerung der Höhe des Schneidbrenners während des Schneidvorgangs durch Erkennung von Änderungen der Lichtbogenspannung.
Ensure cutting quality and work efficiency.
Advanced Plasma Power Supply
Es verwendet die bekannte chinesische Industriemarke Huayuan für industrielle Plasmastromversorgung.
Präzises Schneiden, kein Grat und kleine Fase.
Energiesparend, niedriger Verbrauch, stabilere Leistung.
Options of Gantry Plasma Cutting Machine
For the plasma cutter, the price is different according to the function and configuration. Please contact us for more details.
It depend on the material thickness you want to processing and the running frequency of the machine. Please let us know which material do you want to process and the thickness.
The plasma cutting machine is only for metal sheet, such as stainless steel, carbon steel, copper, aluminum, iron, galvanized, etc..
Verwandte Produkte
Benötigen Sie einen Katalog, einen Preis oder ein Arbeitsvideo der Maschine?
Bitte teilen Sie uns Ihren Namen und Ihre E-Mail-Adresse mit, damit wir Ihnen so schnell wie möglich weitere Informationen zusenden können.
Schreibe die erste Rezension für „Large Size Gantry Plasma Cutting Machine for Metal Steel“
Du musst angemeldet sein, um eine Rezension veröffentlichen zu können.
Rezensionen
Es gibt noch keine Rezensionen.